Need help?
Search our help center for answers to your questions.
How do I install an eSIM on a Huawei device?
Step-by-step guide to install and activate eSIM on compatible Huawei smartphones using QR code or manual settings
Last updated 5/26/20253 min read
Supported Huawei Models
Before you begin, verify that your Huawei phone supports eSIM:
| Model | eSIM Support |
|---|---|
| Huawei P40 | Yes |
| Huawei P40 Pro | Yes |
| Huawei Mate 40 Pro | Yes |
| Huawei Pura 70 Pro | Yes |
| Huawei P40 Pro+ | No |
| Huawei P50 | No |
| Huawei P60 | No |
If you don’t see an EID (Embedded SIM ID) under Settings > About Phone, your device isn’t eSIM-compatible.
Prerequisites
- Confirm your device is network-unlocked and listed above.
- Have a stable internet connection (Wi-Fi recommended).
- Ensure you’ve received either:
- A QR code from your eSIM provider, or
- SM-DP+ Address and Activation Code (plus any confirmation code).
Installation via QR Code
Follow these steps if you have a QR code:
- Open Settings on your Huawei device.
- Tap Mobile Network > SIM Management.
- Select Add eSIM.
- If prompted, enable eSIM support.
- Tap the Add eSIM button (usually at the bottom).
- Point your camera at the QR code provided.
- Tap Add eSIM to confirm.
- Wait (up to a few minutes) for activation to complete.
Tip: Keep your device connected to Wi-Fi and avoid closing the screen during activation.
Manual Installation
Use this method if you cannot scan a QR code:
- Go to Settings > Mobile Network > SIM Management.
- Tap Add eSIM.
- Press the Add eSIM button.
- Choose Enter Manually.
- Input the SM-DP+ Address and Activation Code exactly as provided.
- Leave the Confirmation Code field blank unless instructed otherwise.
- Tap Add this eSIM and wait for activation to finish.
- Once active, enable the eSIM and turn on Data Roaming if needed.
Common mistake: entering the confirmation code when none was provided—leave it blank unless your carrier specifies otherwise.
Managing Your eSIM
- Switch between your physical SIM and eSIM under Settings > Mobile Network > SIM Management.
- To enable or disable the eSIM, toggle its switch in SIM Management.
- Configure APN settings if your carrier requires custom values.
Deactivating or Cancelling Your eSIM
- Deactivating your eSIM in settings only removes it from your device—it does not cancel your service plan.
Do NOT assume that removing the eSIM cancels your subscription; contact your carrier for plan changes or cancellations.